查看“模块:Convert/text”的源代码

来自中文乐谱库

因为以下原因，您没有权限编辑本页：

---

您可以查看与复制此页面的源代码。

-- Text used by Module:Convert for enwiki. -- This is a separate module to simplify translation for use on another wiki. -- See [[:en:Template:Convert/Transwiki guide]] if copying to another wiki. local translation_table = { omitsep = true, -- omit separator before local symbol/name per_word = '每', -- for units like "liters per kilometer" plural_suffix = '', -- disable plural unit names specials = { -- for special processing by makeunits -- The text here must be the same as that in the unit definitions. utype = { -- ["unit type in local language"] = "name_used_in_this_script" ["油耗"] = "type_fuel_efficiency", ["長度"] = "type_length", ["溫度"] = "type_temperature", ["容量"] = "type_volume", }, ucode = { exception = { -- ["unit code in local language"] = "name_used_in_module_convert" ["ft"] = "integer_more_precision", ["in"] = "subunit_more_precision", ["lb"] = "integer_more_precision", }, istemperature = { -- Common temperature scales (not keVT or MK). -- ["unit code in local language"] = 1 ["C"] = true, ["F"] = true, ["K"] = true, ["R"] = true, }, usesymbol = { -- Use unit symbol not name if abbr not specified. -- ["unit code in local language"] = 1 ["C"] = 1, ["F"] = 1, ["K"] = 1, ["R"] = 1, ["C-change"] = 1, ["F-change"] = 1, ["K-change"] = 1, }, alttype = { -- Unit has an alternate type that is a valid conversion. -- ["unit code in local language"] = "alternate type in local language" ["Nm"] = "能量", ["ftlb"] = "力矩", ["ftlb-f"] = "力矩", ["ftlbf"] = "力矩", ["inlb"] = "力矩", ["inlb-f"] = "力矩", ["inlbf"] = "力矩", ["inoz-f"] = "力矩", ["inozf"] = "力矩", }, }, }, mtext = { section_names = { -- name_used_in_this_script = 'Section title used in conversion data' overrides = '覆蓋單位', conversions = '換算', outmultiples = '多重輸出單位', combinations = '組合單位', inmultiples = '多重輸入單位', defaults = '預設輸出單位', links = '單位鏈接', varnames = 'Variable names', -- (for slwiki) }, }, } -- Some units accept an SI prefix before the unit code, such as "kg" for kilogram. local SIprefixes = { -- The prefix field is what the prefix should be, if different from the prefix used. -- 參閱[[國際單位制詞頭]] ['Y'] = { exponent = 24, name = '-{zh:堯;zh-cn:尧;zh-tw:佑;zh-hk:堯}-', name_long = '堯它', name_en = 'yotta'}, ['Z'] = { exponent = 21, name = '-{zh:澤;zh-cn:泽;zh-tw:皆;zh-hk:澤}-', name_long = '澤它', name_en = 'zetta'}, ['E'] = { exponent = 18, name = '-{zh:艾;zh-cn:艾;zh-tw:艾;zh-hk:穰}-', name_long = '艾可薩', name_en = 'exa'}, ['P'] = { exponent = 15, name = '-{zh:拍;zh-cn:拍;zh-tw:拍;zh-hk:秭}-', name_long = '拍它', name_en = 'peta'}, ['T'] = { exponent = 12, name = '-{zh:太;zh-cn:太;zh-tw:兆;zh-hk:垓}-', name_long = '太拉', name_en = 'tera'}, ['G'] = { exponent = 9, name = '-{zh:吉;zh-cn:吉;zh-tw:吉;zh-hk:京}-', name_long = '吉咖', name_en = 'giga'}, ['M'] = { exponent = 6, name = '-{zh:百萬;zh-cn:兆;zh-tw:百萬;zh-hk:百萬}-', name_long = '百萬', name_en = 'mega'}, ['k'] = { exponent = 3, name = '千', name_en = 'kilo'}, ['h'] = { exponent = 2, name = '百', name_en = 'hecto'}, ['da']= { exponent = 1, name = '十', name_en = 'deca'}, ['d'] = { exponent = -1, name = '分', name_en = 'deci'}, ['c'] = { exponent = -2, name = '厘', name_en = 'centi'}, ['m'] = { exponent = -3, name = '毫', name_en = 'milli'}, ['μ'] = { exponent = -6, name = '微', name_en = 'micro', prefix = 'µ'}, -- key = 'GREEK SMALL LETTER MU' (U+03BC) utf-8 CE BC ['µ'] = { exponent = -6, name = '微', name_en = 'micro'}, -- key = 'MICRO SIGN' (U+00B5) utf-8 C2 B5 ['u'] = { exponent = -6, name = '微', name_en = 'micro', prefix = 'µ'}, -- not an SI prefix, but allow for people typing this ['n'] = { exponent = -9, name = '-{zh:納;zh-cn:纳;zh-tw:奈;zh-hk:納}-', name_long = '納諾', name_en = 'nano'}, ['p'] = { exponent =-12, name = '皮', name_long = '皮可', name_en = 'pico'}, ['f'] = { exponent =-15, name = '飛', name_long = '飛母托', name_en = 'femto'}, ['a'] = { exponent =-18, name = '阿', name_long = '阿托', name_en = 'atto'}, ['z'] = { exponent =-21, name = '-{zh:仄;zh-cn:仄;zh-tw:介;zh-hk:仄}-', name_long = '仄普托', name_en = 'zepto'}, ['y'] = { exponent =-24, name = '-{zh:幺;zh-cn:幺;zh-tw:攸;zh-hk:幺}-', name_long = '幺科托', name_en = 'yocto'}, } -- Some units can be qualified with one of the following prefixes, when linked. local customary_units = { { "US", link = "美制單位" }, { "U.S.", link = "美制單位" }, { "imperial", link = "英制單位" }, { "imp", link = "英制單位" }, } -- Names when using engineering notation (a prefix of "eN" where N is a number; example "e6km"). -- key = { "name", link = "article title", exponent = numeric_key_value } -- If lk=on and link is defined, the name of the number will appear as a link. local eng_scales = { ["3"] = { "× 10³", exponent = 3 }, ["4"] = { "× 10⁴", exponent = 4 }, ["5"] = { "× 10⁵", exponent = 5 }, ["6"] = { "× 10⁶", exponent = 6 }, ["7"] = { "× 10⁷", exponent = 7 }, ["8"] = { "× 10⁸", exponent = 8 }, ["9"] = { "× 10⁹", exponent = 9 }, ["10"] = { "× 10¹⁰", exponent = 10 }, ["11"] = { "× 10¹¹", exponent = 11 }, ["12"] = { "× 10¹²", exponent = 12 }, ["13"] = { "× 10¹³", exponent = 13 }, ["14"] = { "× 10¹⁴", exponent = 14 }, ["15"] = { "× 10¹⁵", link = "数量级 (数)#1015", exponent = 15 }, } -- One of the following categories is included in the text of each message. -- Using the same category for each is simplest. local all_categories = { unit = "[[Category:未獲Convert模塊承認的單位或選項]]", option = "[[Category:未獲Convert模塊承認的單位或選項]]", } -- For some error messages, the following puts the wanted style around -- each unit code marked like '...%{ft%}...'. local unitcode_regex = '%%([{}])' local unitcode_replace = { ['{'] = '「', ['}'] = '」' } -- no longer need the more elaborate substitute used before 2013-09-28 -- All messages that may be displayed if a problem occurs. local all_messages = { -- Message format string: $1=title, $2=text, $3=category, $4=anchor. -- Each displayed message starts with "Convert:" so can easily locate by searching article. cvt_format = '<sup class="noprint Inline-Template" style="white-space:nowrap;">[<i>[[:en:Help:Convert messages#$4|<span title="Convert: $1">convert: $2</span>]]</i>]</sup>$3', cvt_format2 = '<sup class="noprint Inline-Template" style="white-space:nowrap;">[[:en:Help:Convert messages#$4|<span title="Convert: $1">$2</span>]]</sup>$3', cvt_format_preview = '<strong class="error">Error in convert: $1 [[:en:Help:Convert messages#$4|(help)]]</strong>$3', -- Each of following messages is a table: -- { [1] = 'title', -- mouseover title text -- [2] = 'text', -- link text displayed in article -- [3] = 'category key', -- key to lookup category in all_categories -- [4] = 'anchor', -- anchor for link to relevant section on help page -- regex = gsub_regex, -- replace = gsub_table, -- } Mouseover title text Link text CatKey Anchor cvt_bad_input = { '参数值“$1”必须是个数字和单位' , '无效输入' , 'option', 'invalid_input' }, cvt_bad_num = { '參數值「$1」必須是個數字' , '無效數字' , 'option', 'invalid_number' }, cvt_big_prec = { '「$1」的精確度過高' , '精確度過高' , 'option', 'precision_too_large' }, cvt_invalid_num = { '數字溢出產生錯誤' , '數字溢出' , 'option', 'number_overflow' }, cvt_no_num = { '需要一個數字進行轉換' , '需要數字' , 'option', 'needs_number' }, cvt_no_num2 = { '需要另一個數字定義範圍' , '需要另一個數字' , 'option', 'needs_another_number' }, cvt_bad_frac = { '分母或分子「$1」必須是大過1的整數' , '無效分數' , 'option', 'invalid_fraction' }, cvt_bad_prec = { '精確度「$1」必須是整數' , '無效精確度' , 'option', 'invalid_precision' }, cvt_bad_sigfig = { '精準度參數sigfig「$1」必須是正整數' , '無效的sigfig' , 'option', 'invalid_sigfig' }, cvt_empty_option = { '留空的參數值「$1」已被忽視' , '留空的選項' , 'option', 'empty_option' }, cvt_deprecated = { '选项“$1"已被废弃' , '*' , 'option', 'deprecated_option', format = 'cvt_format2' }, cvt_no_spell = { '參數值無效' , '錯誤：請尋求協助' , 'option', 'ask_for_help' }, cvt_unknown_option = { '無效參數值「$1」已被忽視' , '無效的選項' , 'option', 'invalid_option' }, cvt_wd_fail = { '未能访问维基数据' , '维基数据问题' , 'option', 'wikidata_problem' }, cvt_bad_default = { '單位「$1」存在無效預設值' , '錯誤：請尋求協助' , 'unit' , 'ask_for_help' }, cvt_bad_unit = { '單位「$1」無效' , '單位於次無效' , 'unit' , 'unit_invalid_here' }, cvt_no_default = { '單位「$1」 沒有預設輸出值' , '錯誤：請尋求協助' , 'unit' , 'ask_for_help' }, cvt_no_unit = { '須要單位名字' , '缺失單位名' , 'unit' , 'needs_unit_name' }, cvt_unknown = { '不明單位「$1」' , '不明單位' , 'unit' , 'unknown_unit' }, cvt_should_be = { '$1' , '單位名有歧義' , 'unit' , 'ambiguous_unit', regex = unitcode_regex, replace = unitcode_replace }, cvt_mismatch = { '無法將「$1」轉換成「$2」' , '單位不匹配' , 'unit' , 'unit_mismatch' }, cvt_bug_convert = { '錯誤：無法轉換制定的單位' , '錯誤：請尋求協助' , 'unit' , 'ask_for_help' }, cvt_lookup = { '單位「$1」的定義不正確' , '錯誤：請尋求協助' , 'unit' , 'ask_for_help' }, } -- Text to join input value/unit with output value/unit. local disp_joins = { -- [1]=before output, [2]=after output, [3]=between outputs in a combination; default "; " -- [wantname] gives default abbr=off ["or"] = { "或" , "" , "或", wantname = true }, ["sqbr-sp"] = { " [" , "]" }, ["sqbr-nbsp"] = { "&nbsp;[" , "]" }, ["comma"] = { ", " , "" , "" }, ["slash-sp"] = { "／" , "" , wantname = true }, ["slash-nbsp"] = { "／", "" , wantname = true }, ["slash-nosp"] = { "／" , "" , wantname = true }, ["b"] = { "（" , "）", "；" }, ["(or)"] = { "（" , "）", "或" }, ["br"] = { "<br/>" , "" , wantname = true }, ["br()"] = { "<br/>（" , "）", wantname = true }, } -- Text to separate values in a range. local range_types = { -- Specifying a table requires either: -- * "off" and "on" values (for "abbr=off" and "abbr=on"), or -- * "input" and "output" values (for LHS and RHS); -- other fields are optional. -- When "adj=on|abbr=off" applies, spaces in range text are replaced with hyphens. -- With "exception = true", that also occurs with "adj=on|abbr=on". -- If "adj" is defined here, that text (unchanged) is used with "adj=on". ["+"] = "加", [","] = "、", [", and"] = "和", [", or"] = "或", ["by"] = "乘", ["-"] = "～", ["to about"] = "至大約", ["and"] = { off = "和", on = "、", exception = true }, ["and(-)"] = { input = "和", output = "～" }, ["or"] = { off = "或" , on = "或" , exception = true }, ["to"] = { off = "至" , on = "至" , exception = true }, ["to(-)"] = { input = "至", output = "～" }, ["+/-"] = { off = "正負", on = " ± ", adj = "正負", is_range_change = true }, ["by(x)"] = { input = "乘", output = " ×&nbsp;", out_range_x = true }, ["x"] = { off = "乘", on = " ×&nbsp;", abbr_range_x = true }, ["xx"] = "乘", ["*"] = "×", -- use "*" to replace "x" in {{convert/2}} which is different from "x" in old {{convert}} ["/"] = "／", -- for a table of high/low temperatures with {{convert|83|/|63|F|disp=br()|abbr=values}} } local range_aliases = { -- ["alternative name for a range"] = "standard range name" ["&"] = "and", ["–"] = "-", ["&ndash;"] = "-", ["to-"] = "to(-)", ["×"] = "x", ["&times;"] = "x", ["±"] = "+/-", ["&plusmn;"] = "+/-", ["和"] = "and", ["或"] = "or", ["至"] = "to", } -- Convert accepts range text delimited with whitespace, for example, {{convert|1 to 2|ft}}. -- In addition, the following "words" are accepted without spaces, for example, {{convert|1-2|ft}}. -- Words must be in correct order for searching, for example, 'x' after 'xx'. local range_words = { '-', '–', 'xx', 'x', '*' } local ranges = { types = range_types, aliases = range_aliases, words = range_words, } -- Valid option names. local en_option_name = { -- ["local text for option name"] = "en name used in this module" ["$"] = "$", ["abbr"] = "abbr", ["adj"] = "adj", ["comma"] = "comma", ["debug"] = "debug", ["disp"] = "disp", ["frac"] = "frac", ["input"] = "input", ["lang"] = "lang", ["lk"] = "lk", ["near"] = "near", ["order"] = "order", ["qid"] = "qid", ["round"] = "round", ["sigfig"] = "sigfig", ["sing"] = "adj", -- "sing" is an old alias for "adj" ["sortable"] = "sortable", ["sp"] = "sp", ["spell"] = "spell", ["stylein"] = "stylein", ["styleout"] = "styleout", } -- Valid option values. -- Convention: parms.opt_xxx refers to an option that is set here -- (not intended to be set by the template which invokes this module). -- Example: At enwiki, "abbr" includes: -- ["comma"] = "opt_nocomma" -- As a result, if the template uses abbr=comma, Module:Convert sets: -- parms["opt_nocomma"] = true -- parms["abbr"] = nil -- Therefore parms.abbr will be nil, or will have one of the listed values -- that do not start with "opt_". -- An option value of form "xxx?" is the same as "xxx" but shows the input as deprecated. local en_option_value = { -- $=x is handled as a special case: x should be a currency symbol that will be used instead of "$" ["abbr"] = { -- ["local text for option value"] = "en value used in this module" ["comma"] = "opt_nocomma?", -- no numsep in input or output numbers ["def"] = "", -- ignored (some wrapper templates call convert with "abbr=def" to mean "default abbreviation") ["h"] = "on", -- abbr=on + use "h" for hand unit (default) ["hh"] = "opt_hand_hh", -- abbr=on + use "hh" for hand unit ["in"] = "in", -- use symbol for LHS unit ["mos"] = "mos", -- in a range, repeat the input unit (no longer used) ["none"] = "off", -- old name for "off" ["off"] = "off", -- use name for all units ["on"] = "on", -- use symbol for all units ["out"] = "out", -- use symbol for RHS unit (default) ["unit"] = "unit", -- abbr=on but abbreviate units only: e6km → million km (not ×10⁶ km) ["values"] = "opt_values", -- show only input and output numbers, not units ["~"] = "opt_also_symbol", -- show input unit symbol as well as name }, ["adj"] = { ["1"] = "opt_singular", -- unit name is singular when value satisfies: (-1 <= v and v < 0) or (0 < v and v <= 1) ["flip"] = "opt_flip?", -- reverse order of input/output ["j"] = "opt_use_nbsp", -- "join": use "&nbsp;" instead of " " between value and unit name ["mid"] = "opt_adjectival, opt_adj_mid", -- adj=on with user-specified text after input unit (between input and output) ["nocomma"] = "opt_nocomma?", -- no numsep in input or output numbers ["off"] = "", -- ignored (off is the default) ["on"] = "opt_adjectival", -- unit name is singular and hyphenated ["pre"] = "opt_one_preunit", -- user-specified text before input unit ["ri0"] = "opt_ri=0", -- round input with precision = 0 ["ri1"] = "opt_ri=1", -- round input with precision = 1 ["ri2"] = "opt_ri=2", -- round input with precision = 2 ["ri3"] = "opt_ri=3", -- round input with precision = 3 }, ["comma"] = { ["5"] = "opt_comma5", -- only use numsep grouping if 5 or more digits ["gaps"] = "opt_gaps", -- use gaps, not numsep, to separate groups of digits ["gaps3"] = "opt_gaps, opt_gaps3", -- group only in threes rather than default of no gap before a single digit after decimal mark ["gaps5"] = "opt_gaps?", -- deprecated 2015-05-29, was: opt_gaps + opt_comma5 ["off"] = "opt_nocomma", -- no numsep in input or output numbers }, ["debug"] = { ["yes"] = "opt_sortable_debug", -- make the normally hidden sort key visible }, ["disp"] = { ["/"] = "or?", -- see "slash" ["2"] = "opt_output_only?", -- display only output value and symbol/name (not input) ["5"] = "opt_round=5", -- round output value to nearest 5 ["b"] = "b", -- join: '(...)' ["(or)"] = "(or)", -- join: '(...)' with 'or' between outputs in a combination ["br"] = "br", -- join: '<br />' ["br()"] = "br()", -- join: '<br />(...)' ["comma"] = "comma", -- join: ',' ["flip"] = "opt_flip", -- reverse order of input/output ["flip5"] = "opt_flip, opt_round=5?", -- disp=flip + disp=5 ["nocomma"] = "opt_nocomma?", -- no numsep in input or output numbers ["number"] = "opt_output_number_only", -- display output value (not input, and not output symbol/name) ["or"] = "or", -- join: 'or' ["out"] = "opt_output_only", ["output number only"] = "opt_output_number_only", ["output only"] = "opt_output_only", ["preunit"] = "opt_two_preunits", -- user-specified text before input and output units ["s"] = "or?", -- see "slash" ["slash"] = "or?", -- 2014-11-03: "disp=slash" is now equivalent to "disp=or" as slash is unhelpful ["sqbr"] = "sqbr", -- join: '[...]' ["table"] = "opt_table", -- output is suitable for a table cell with align="right" ["tablecen"] = "opt_tablecen", -- output is suitable for a table cell with align="center" ["u2"] = "opt_output_unit_only?", -- display output symbol/name (not input, and not output value) ["unit"] = "opt_input_unit_only", -- display input symbol/name (not output, and not input value) ["unit or text"] = "opt_input_unit_only, opt_ignore_error", -- display input symbol/name, or given unit code if not known ["unit2"] = "opt_output_unit_only", ["x"] = "x", -- join: <first>...<second> (user-specified text) }, -- frac=x is handled as a special case: x must be an integer (possibly in local language) = 2 or more -- input=x is handled as a special case: x should be <value><space><unitcode> or <wikidata-property-id> ["lang"] = { -- language for output digits (both en and local digits are always accepted for input) ["en"] = "opt_lang_en", -- use en digits for numbers, regardless of local language ["local"] = "opt_lang_local", -- use local digits for numbers (default, although config can change default to en) }, ["lk"] = { ["in"] = "in", -- link LHS unit name or symbol ["off"] = "off", -- do not link: same as default except for hand unit ["on"] = "on", -- link all unit names or symbols (but not twice for the same unit) ["out"] = "out", -- link RHS unit name or symbol }, ["near"] = { ["5"] = "opt_round=5?", -- round output value to nearest 5 }, ["order"] = { ["flip"] = "opt_flip", -- reverse order of input/output ["out"] = "opt_order_out", -- do not show input; instead, use order in output combination, with the first output shown as the input }, -- qid=x is handled as a special case: x should be a Wikidata Q item identifier. ["round"] = { ["0.5"] = "opt_round=0.5", -- round output value to nearest 0.5 ["5"] = "opt_round=5", -- round output value to nearest 5 ["10"] = "opt_round=10", -- round output value to nearest 10 (same as but clearer than "|-1") ["25"] = "opt_round=25", -- round output value to nearest 25 ["50"] = "opt_round=50", -- round output value to nearest 50 ["each"] = "opt_round_each", -- using default precision in a range, round each output separately (default uses highest precision of each item in range) }, -- sigfig=x is handled as a special case: x must be an integer (possibly in local language) = 1 or more ["sortable"] = { ["off"] = "", -- ignored (off is the default) ["in"] = "opt_sortable_on?", -- same as "on" ["on"] = "opt_sortable_on", -- output sort key for use in a sortable table, based on value from converting to a standard base unit ["out"] = "opt_sortable_on?", -- same as "on" }, ["sp"] = { ["us"] = "opt_sp_us", -- use U.S. spelling (like "meter" instead of default "metre") }, ["spell"] = { -- only English spelling is supported; not scientific notation; only some fractions ["in"] = "opt_spell_in", -- spell input value in words ["In"] = "opt_spell_in, opt_spell_upper", -- spell input value in words with first letter uppercase ["on"] = "opt_spell_in, opt_spell_out", -- spell input and output values in words ["On"] = "opt_spell_in, opt_spell_out, opt_spell_upper", -- same, with first letter of first word in result uppercase }, -- stylein=x is handled as a special case: x can be any text -- styleout=x is handled as a special case: x can be any text } return { SIprefixes = SIprefixes, all_categories = all_categories, all_messages = all_messages, currency = { ['$'] = true, ['£'] = true }, customary_units = customary_units, disp_joins = disp_joins, en_option_name = en_option_name, en_option_value = en_option_value, eng_scales = eng_scales, ranges = ranges, translation_table = translation_table, }

返回至模块:Convert/text。